HP / HT WATER BOILERHigh Pressurised & High Temperature Units
|
Model & Type |
Flow-Through type (in-line) Low Water Volume (No Buffer) |
Heat Output | 10 - 7,000 kW |
Temperature Range | 185 - 300°C |
Pressure Range | 20 - 190 bar gauge |
Energy Source (Fuel) |
Natural gas, LPG, bio-gas,
light and heavy fuel oil, - and combinations hereof. |
Utilisation of Energy (depends on working loads and steam pressures. Designs for ultra high efficiencies on request) |
Efficiencies (based
on LCV) : 85 - 92% (basic boiler design) 90 - 97% (when using an economizer i.e. extra flue gas cooling e.g. for water heating) |
The Product | General Description |
Design | Sketch Horizontal / Vertical |
Data & Dimensions | Tables |
Chimney | Design / Lay-out |
Flue Gas Data | Data & Calculations |
Heat Recovery | 'Economisers' (flue gas) |
Alternative Type 1 |
Steam Boilers
& Steam Boiler Generators |
Alternative Type 2 |
Thermal Oil Heaters Hot Oil Units |
Water table | |
Steam table |
AB&CO are a well-known Danish boiler and heater manufacturer, who have specialised
in customised small and medium size industrial boilers.
The quality is supreme and the price is somewhat higher than the cheapest alternatives
on the market. But the important technical features means that the long
term costs are still much lower.
The Hot Water Generator Boilers types HJ are
compact
industrial hot water boilers with forced circulation for small water
flow in a very wide range of operating temperatures (and corresponding pressures). The special water-tube design means that the
water volume is also very small. Consequently these hot water generator boilers are
starting up very fast, and at the same time 100% safe to operate (no
risk of steam explosions).
DETAILED DESCRIPTION & SPECIFICATIONS |
Heaters
for heating pressurized hot water
above for industrial applications (process heating).
The design is the compact design of winded tube coils for vertical or horizontal design (below sketch), heating the water while flowing though the tube coils (in-line heating). |
The units are all delivered complete and fully equipped with burner of any preferred brand, all armature, instrumentations and safety features. You can choose between oil-fired, gas-fired, with dual fuel (oil and gas) or alternatively electrical heated. The heaters can be optional designed in
different grades of stainless steel, extreme high temperature, operation
pressure and with various extent of accessories in tailor-made system
solutions. |
||||
Type HJ |
Heat |
A [mm] |
B [mm] |
C [mm] |
D [mm] |
E [mm] |
F [mm] |
Weight |
Weight |
23 - 46 | 20 - 40 | 1300 | 1100 | 900 | 550 | 650 | ø110 | 250 | 300 |
70 | 60 | 1800 | 1500 | 1300 | 1000 | 1400 | ø150 | 400 | 450 |
115- 175 | 100- 150 | 2600 | 2100 | 1300 | 1100 | 1500 | ø150 | 500 | 600 |
235 | 200 | 2700 | 2300 | 1500 | 1200 | 1550 | ø210 | 650 | 800 |
350 | 300 | 3300 | 2700 | 1600 | 1200 | 1600 | ø210 | 1000 | 1200 |
465 | 400 | 3400 | 2800 | 1700 | 1250 | 1650 | ø315 | 1300 | 1800 |
700 | 600 | 3700 | 3000 | 1800 | 1350 | 1800 | ø355 | 1700 | 2200 |
930 | 800 | 3900 | 3200 | 2300 | 1700 | 2300 | ø400 | 2400 | 3200 |
1500 | 1300 | 4300 | 3600 | 2500 | 1950 | 2800 | ø500 | 3600 | 4800 |
2300 | 2000 | 5300 | 4600 | 2800 | 2200 | 3100 | ø560 | 4300 | 5800 |
2900 | 2500 | 5500 | 4800 | 3000 | 2400 | 3400 | ø630 | 4800 | 6900 |
3500 - 4700 | 3000 - 4000 | On request |
|||||||
5900 - 7000 | 5100 - 6000 |
All AB&CO
models are customised and above table only represent some of the
available sizes. |