PROCESS AIR SYSTEM

INTEGRATED PULL-OUT HEATER & FILTER DESIGN

AB&CO Easy Clean^{^TM} and ComBlock^{^TM} are developed for use in almost any areas including clean room and sanitary environments, and they are thus an alternative to individual heaters, coolers, filters, fans etc that are adapted and mounted on site in machinery areas.

AB&CO Easy Clean^{^TM} and ComBlock^{^TM} are modular build up in blocks inside a smooth surface and thermal insulated cabinet - with access hatches and doors. Delivered ready for "plug and play".

Pull-out steam section for AB&CO Easy Clean^{^TM}

These integrated process air handling units are customised multi functional air handling unit. The solutions comprise a free choice of parts assembled in one single unit, covering almost any special request for conditioning process air / gas, and utilizing whatever heating and cooling source that are available (steam, thermal fluid/hot oil, hot water, electricity - ice water, brine, glycol and refrigeration coolants).

AB&CO ComBlock^{^TM} as a small unit comprising air intake,prefilter, intermediate filter and
complete steam air battery.

AB&CO ComBlock^{^TM} with pull-out from side

PARTS FOR TAILOR-MADE SOLUTIONS
Air intake - weatherproof Pre-filter - F3/4/5 Winter-coil - steam / thermal fluid Dehumidifier - cooling with condensation Drip-catcher - with drain and trap Reheater - steam / hot water / thermal fluid Fan - suction type / pressurizing type Distribution Chamber - plenum for several outlets Preheater - w. foreign heat source e.g. heat recovery	Steam Heater - high - / low pressure / combination Condensate Recuperative Preheater Thermal Fluid Booster - for extra temperature Electrical Booster - for alternative extra temperature Post filter - F6/7/8/9/10/11 Micro-filter - M12/13 Armatures / Instrumentation - above functions Control System / Interface - customised solutions